BRONYA Metal Elastic
Protective anti-corrosion rubber paint Bronya Metal Elastic is the evolution pinnacle of protective coatings. It is intended for external and internal application. For any type of metal structures.
Following innovative approaches in development and production, NPO “Bronya” llc. has created a product that provides super protection against corrosion and moisture penetration.
Bronya Metal Elastic is a suspension of a complex of anticorrosive additives (prevents the development of rust), pigments and synthetic rubber. It is applied in all weather conditions, even at high temperatures (up to +35 °C) and low (up to -25 °C) temperatures.
Key advantages
High–quality rubber paint Bronya Metal Elastic is the evolution pinnacle of protective coatings. Designed for waterproofing, protection and prolongation of the service life of all types of materials:
· Prevents the development of rust.
· Compatible with metal and non-metallic surfaces.
· Drying speed – 20 minutes before “casting” — at (20 ± 3) °C, complete drying in 5 7 hours at (20 ± 3) °C.
· Applicable for decorative purposes, has an aesthetically pleasing appearance.
· High chemical resistance to salt spray, ultraviolet, ozone.
· High reflectivity.
· High resistance to constant and massive exposure of petroleum products and oils.
· Has a “springy effect”.
· It is easily applied with a roller, brush, airless spray device, spray gun.
· Low consumption, 0,5 kg per 1m2 with two-layer application
· Due to its hyperplasticity, it has a “restoring effect” for light damage, after which the coating will not need to be "tinted" again.
· Does not turn yellow with time.
· Excellent adhesion to various substrates, in most cases without priming.
· High elasticity and crack resistance, including at low temperatures.
· Resistance to the formation of fungus, mold and algae fouling.
· Environmentally friendly.
· The warranty period is 25 years.
Advantages over analogues
Rubber paints based on organic solvent of the Bronya Metal Elastic series – have no analogues in price and quality. They have all-weather properties. They differ in elasticity and versatility of application.
Our own production of rubber dispersions allows to obtain the most effective protection, at a price no more expensive than any other protective coatings on polyurethane, epoxy and even acrylic or alkyd bases.
Protective properties of Bronya Metal Elastic
Prevents corrosion.
Has all-weather protective properties. It is resistant to chemical and mechanical influences (impacts and chips).
Has the “self—healing” property - with light impacts, due to its hyperplasticity, the surface is restored by itself.
Improved Formula 3 in 1 Bronya Metal Elastic
Bronya Metal Elastic is a three-in-one paint with the ability to apply paint on rusty surfaces:
1. Rust neutralizer (the paint contains a complex of zinc salts that dissolve rust);
2. Anti-corrosion primer that prevents further rusting of the metal surface;
3. Durable weather-resistant and wear-resistant decorative coating with resistance to ultraviolet radiation, ozone.
Areas of application Bronya Metal Elastic:
· marine and river structures;
· special equipment, ships;
· railways;
· electrical systems;
· containers;
· swimming pools;
· containers for food and other products;
· tanks and pipelines;
· oil production;
· playgrounds and sports fields;
· domestic use;
· other metal structures of any type (buildings, farms, bridges, tunnels, aqueducts, cisterns, etc.).
Bronya Metal Elastic is chosen by customers for whom the main need is to paint structures with high-quality paints with a guaranteed long service life.
Detailed Specifications:
· Base material: Synthetic rubber.
· Mass fraction of non-volatile substances is 52%.
· Density is 1300-14kg/m3.
· Time of drying to “casting” at 20±3 °С, = 20-30 min.
· Viscosity = 16 Pa•s at 20 °С.
· Initial tensile strength at 20 °C = 36 kgs/cm2.
· Tensile strength = 148 kgs/cm2.
· Adhesion to concrete — 2,5 mPa.
· Adhesion to metal — 2,3 mPa.
· Adhesion to plastic — 1,3 mPa.
· Adhesion (DIN ISO 2409) — G0.
· Resistance of the film to static effects of water, at a temperature of 20±2 °С, h, at least 168 hours.
· Elasticity — 350%.
· Water swelling at a temperature of 20 °С and a time of 168 h = 0%.
· Frost resistance up to -55 °C.
· Operating temperature ranges from -55 °C to +150 °С.
· Storage temperature ranges from -35 °C to +35 °C.
Application Method
-
Clean the painted surface from dust, dirt, rust, peeling of the old coating. If there are fat-and-oil films on the surface, then the surface must be degreased with xylene solvent.
-
Mix the paint Bronya Metal Elastic thoroughly before applying.
-
If necessary, the sealant paint can be diluted to a working viscosity (no more than 10%) with xylene.
-
The sealant paint is applied to the surface with a brush, roller or spray in 1-2 layers.
- After finishing the work, the tool is washed with an organic solvent xylene.
Bronya Metal Elastic is supplied in the following containers:
Bronya Metal Elastic 10 kg | Bronya Metal Elastic 20 kg |
![]() |
![]() |