Bronya ThermoHydroPlast is developed for application at negative ambient temperatures from -25 ° С to + 35 ° С. It is designed for heat insulation and waterproofing of external and internal surfaces of enclosing structures of buildings and structures, foundations, roofs, pipelines, tanks, air ducts, chimneys, industrial equipment, sea and river vessels, mtransport hulls for various purposes, containers, tanks and tanks, including non-absorbent surfaces or surfaces with low absorption capacity that are plastic, polymer materials: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), non-ferrous metals, dense concrete and other surfaces.
Long-term weather-resistant coating is designed for operation in conditions of constant contact with water, aggressive media, including salt fog. The operating temperature of Bronya ThermoHydroPlast ranges from -55 ° С to +150 ° С.
Application
High-quality rubber waterproofing, vibration-proof, sound-absorbing coating Bronya ThermoHydroPlast is the pinnacle of the evolution of protective coatings.
It is designed for waterproofing, vibration insulation, sound absorption, protection and extension of service life of all types of materials:
• plastic,
• galvanized and black metal,
• wood,
• concrete,
• brick,
• plaster,
• plasterboard,
• slate,
• bitumen roll with sprinkling and mastic smooth substrates,
• EPDM, PVC and TPO of single-layer membranes,
• flat, pitched and domed roof structures
• and other surfaces for external and internal application
Bronya ThermoHydroPlast provides super protection against moisture penetration and any weather conditions.
This paint serves as the top reflective layer. After complete drying and polymerization, Bronya ThermoHydroPlast forms a seamless, rubber-like, waterproof membrane. The special formula provides high strength, elasticity, resistance to fungal and mold damage, as well as resistance to extreme atmospheric effects and ultraviolet
Key benefits
- drying rate is 20 minutes to touch at (20±3) ° С, complete drying is 5-7
hours at (20±3) ° С.
- all-weather application: from -25 ° С to + 35 ° С;
- simultaneously provides waterproofing, vibration and sound insulation;
- compatible with any surfaces: wood, concrete, brick, plaster, gypsum board, slate and others;
- it is possible to apply also on non-absorbent surfaces or surfaces with low absorbent capacity that are plastic, polymer materials: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), non-ferrous metals, dense concrete and other surfaces;
-·can be in constant contact with water and aggressive environments, including "salt fog" and on the "first coastline
- forms a continuous coating of the facility with the elimination of cold bridges and absolute water impermeability;
- in places of constant humidity it is able to carry thermal insulation, including on highly plastic, plastic, glossy polycarbonates (with the necessary base for application, see an application guide)
- does not increase the load on the foundation and other building structures;
- is characterized by high durability and weather resistance to frosty drops, constant finding in direct sunlight including constant frosty drops and constant finding in direct sunlight.
- high elasticity and crack resistance including at low temperatures
- resistance to fungal formation, mold and algae fouling
- does not contain organic solvents, odorless, does not ignite, environmentally safe
- Warranty service life is 25 years.
Our advantages over analogues
- Rubber coatings on an organic solvent of the Bronya ThermoHydroPlast series, due to the high all-weather properties, waterproofing, vibration- insulating, sound-absorbing, chemical resistance, as well as elasticity and versatility of application have no analogues of price/quality.- The own production and development of rubber dispersions allows you to obtain the most effective protection, at a price no more expensive than any other protective coatings (on polyurethane, epoxy and even acrylic or alkyd bases), as well as high quality products.
Protective Properties of Bronya ThermoHydroPlast
- It has all-weather protective properties. It is resistant to chemical, mechanical influences (impacts and chips).
- It has the property of "self-restoration" - with light impacts due to its hyperplasticity, the surface itself is restored.
Spheres of Bronya ThermoHydroPlast application:
Bronya ThermoHydroPlast is indispensable for surfaces that must be both heat-insulated or condensate-free and resistant to water, as well as chemical and mechanical impacts. It is indispensable for application, where it is important not to increase the thickness of heat insulation and waterproofing.Examples of application:
- Plastic and metal pipes, tanks, tanks, structures for the purpose of heat insulation or elimination of condensate formation, as well as protection against atmospheric influences and ultraviolet radiation.- Hard-to-reach places, for example: water isolation valves, air ducts
- Floors before installation of warm floors;
- Bathrooms, showers, toilets, swimming pools, where insulation requires additional waterproofing;
- Walls, floors inside and outside the premises (both residential and basement);
- Balconies, loggias, windows and doorways.
Detailed characteristics:
- Base of material: synthetic rubber;
- Mass fraction of non-volatile substances, % 50
- Density kg/m3, 600±10%
- Drying time to "touch" at (20±3) 0C, min 20 - 30
- Viscosity, 20C Pa • s (Pa * s) - 16
- Initial tensile strength at 20 ° C - 36 kgf/cm2
- Tensile strength - 148 kgf/cm2
- Adhesion to concrete, mPa - 2.5
- Adhesion to metal, mPa - 2.3
- Adhesion to plastic, mPa - 1.3
- Adhesion (DIN ISO 2409) - G0
- Film resistance to static water exposure, at t = (20±2) оС, h, not less than 168
- Vapor permeability - 0.8 g/m2/h
- Elasticity,% - 350
- Water swell 20 ° C, 168h - 0%
- Frost resistance, up to - 55 ° C
- Operating temperature, Celsius, -55 ° C to + 150 ° C
- Storage temperature from -35 ° C to + 35 ° C.
