During the construction and operation of buildings and structures important structures waterproofing, Bronya Hydroprotect almost completely eliminates the phenomenon of capillary leak, considerably reduces water absorption when direct surface moistening, at the same time, does not reduce the water vapor permeability of the surface. On the surface of the material formed a very thin film of polymer that, when exposed to moisture, closes the pores of the material and does not allow moisture to penetrate. The hydrophobization prevents the appearance of efflorescence on brickwork,increases the durability of the surface, it virtually eliminates the incidence of fungi and mold, while maintaining strength.
Now on the market of waterproofing materials presents a variety of water repellents for brick, concrete and other building materials. But as you know they have a high heat capacity, which in turn radically affects the thermophysical properties of liquid insulation (this is the basic principle of liquid insulating materials,namely, low heat transfer in the air).
Bronya Hydroprotect, is absolutely not compromise the physics of hyperfine heat insulation! (including competing materials). Able, in contrast to analogues, to improve the thermophysical properties of liquid insulation, as well as a dramatic increase in the life cover and provide protection from corrosive environments.
We carry out a simple experiment:
On the plate install the plate with the applied ultra-thin insulation Bronya and bring the temperature on rough surfaces up to 100 °C.
On the plate 3 of the sample of coverage:
1. The rival material;
2. Bronya Facade;
3. BRONYA Facade + Bronya Hydroprotect
For clarity, put 4 pieces of ice.
Check the temperature on the surface
Conclusions:
Use Bronya Hydroprotect allows not only to produce waterproofing of building envelopes, but also to enhance the thermal insulation properties of superfine heat insulation Bronya, as well as to reduce heat transfer from the surface.
Purpose waterrepellent:
Bulk and surface protection from water and moisture. Is used for machining internal and external surfaces of brick, concrete, foam and aerated concrete cementogenesis and wooden enclosing structures of buildings and structures (basements, balconies, roofs, flashings, slopes, etc.), as well as slate and tiled roofs in the temperature range from -60 to +150°C.
Water repellent properties:
The water repellent composition:
Water-based composition of silicone copolymers.
Application as water repellent:
The surface clean from dust and dirt, grease and oil stains, remove of detachment. Apply Bronya Hydroprotect by brush, roller or spray at a temperature not lower than +5C to full saturation of the material. Hydrophobic effect occurs within 24 hours. Before the onset of the hydrophobic effect to prevent the ingress of water on the treated surface. Flow rate 300-500g/m2.
Conditions of transportation and storage of waterrepellent:
Store in a well ventilated area, protected from direct sunlight, at temperatures from 0 to +30 ° C in tightly closed container. Shelf life - 24 months from date of manufacture.
Note:
In addition to this instruktsii, when working with Bronya Hydroprotect should be guided by SNiP 3.04.01-87, and General instructions for execution of the construction works. When doubt about the possibility of the application of material, you should test it yourself or consult with the manufacturer.
Safety:
To work in protective glasses and gloves. When processing by spraying use a respirator.
Bronya Hydroprotect: do NOT FREEZE!
Now on the market of waterproofing materials presents a variety of water repellents for brick, concrete and other building materials. But as you know they have a high heat capacity, which in turn radically affects the thermophysical properties of liquid insulation (this is the basic principle of liquid insulating materials,namely, low heat transfer in the air).
Bronya Hydroprotect, is absolutely not compromise the physics of hyperfine heat insulation! (including competing materials). Able, in contrast to analogues, to improve the thermophysical properties of liquid insulation, as well as a dramatic increase in the life cover and provide protection from corrosive environments.
We carry out a simple experiment:
On the plate install the plate with the applied ultra-thin insulation Bronya and bring the temperature on rough surfaces up to 100 °C.
On the plate 3 of the sample of coverage:
1. The rival material;
2. Bronya Facade;
3. BRONYA Facade + Bronya Hydroprotect
For clarity, put 4 pieces of ice.
|
 |
 |
Check the temperature on the surface
 |
 |
|
| Competing material, the surface temperature of 58 °C | The superfine heat insulation Bronya Facade, surface temperature 50 °C | The superfine heat insulation Bronya Facade + water repellent Armor, the surface temperature 46 °C |
Conclusions:
Use Bronya Hydroprotect allows not only to produce waterproofing of building envelopes, but also to enhance the thermal insulation properties of superfine heat insulation Bronya, as well as to reduce heat transfer from the surface.
Purpose waterrepellent:
Bulk and surface protection from water and moisture. Is used for machining internal and external surfaces of brick, concrete, foam and aerated concrete cementogenesis and wooden enclosing structures of buildings and structures (basements, balconies, roofs, flashings, slopes, etc.), as well as slate and tiled roofs in the temperature range from -60 to +150°C.
Water repellent properties:
-
- does not change appearance of the material, its vapor and air permeability;
- gives the material water-repellent properties;
- increases the frost resistance;
- prevents contamination and the appearance of fungal structures and efflorescence.
- properties are preserved up to 10 years.
The water repellent composition:
Water-based composition of silicone copolymers.
Application as water repellent:
The surface clean from dust and dirt, grease and oil stains, remove of detachment. Apply Bronya Hydroprotect by brush, roller or spray at a temperature not lower than +5C to full saturation of the material. Hydrophobic effect occurs within 24 hours. Before the onset of the hydrophobic effect to prevent the ingress of water on the treated surface. Flow rate 300-500g/m2.
Conditions of transportation and storage of waterrepellent:
Store in a well ventilated area, protected from direct sunlight, at temperatures from 0 to +30 ° C in tightly closed container. Shelf life - 24 months from date of manufacture.
Note:
In addition to this instruktsii, when working with Bronya Hydroprotect should be guided by SNiP 3.04.01-87, and General instructions for execution of the construction works. When doubt about the possibility of the application of material, you should test it yourself or consult with the manufacturer.
Safety:
To work in protective glasses and gloves. When processing by spraying use a respirator.
Bronya Hydroprotect: do NOT FREEZE!
