The purpose of the primer:
Acrylic deep penetration Facade primer in solution (milky white liquid with almost no odor). It is intended for processing facade absorbent substrates for painting, putty, plastering, etc. It is used for processing concrete, brick, cement-sand and other facade surfaces.
The composition of the primer:
prepared water, acrylic dispersion, modifying and antiseptic additives.
Properties of the primer:
● strengthens the surface of the base;
● increases the adhesion of materials to the substrate;
● reduces the absorbency of the base;
● it has a high penetrating ability;
● does not reduce the vapor permeability of the base;
● it is environmentally safe.
● The Bronya Facade primer is designed and recommended for use with liquid ceramic thermal insulation coatings of "BRONYA" series, improves adhesion of LCT to the surface, reduces material consumption.
Surface preparation:
The base must be cleaned of old coatings and detachments. The surface must be dry and clean.
Applying the primer:
Before applying, the finished primer must be mixed. Methods of application - by brush, roller, spray. Drying time is 2 hours at a temperature of +20 ° C. Consumption is 100-200 g/m2 when applied in one layer.
Note:
In addition to these instructions, when working with ready-made primers, you should follow SNiP 3.04.01-87, as well as general instructions for performing construction work. If you doubt the possibility of using ready-made primers, you should test them yourself or consult with the manufacturer.
Storage and precautions:
Store in a closed container at a temperature of +5 to +30 °C. The storage life is no more than 12 months.
The primer Bronya Facade MUST NOT BE FROZEN!
The primer Bronya Facade is supplied in cans with a volume of 10 liters.