Bronya VibroHydroPlast is a liquid single-component material with vibration-insulating, sound-absorbing and waterproofing properties. The material has the highest chemical and mechanical resistance, excellent elasticity and durability. It is produced on the basis of a synthetic rubber polymer with the addition of solvents, functional additives and a highly porous nanogel. It protects the surface from water and chemical exposure.

Bronya VibroHydroPlast is developed for application at negative ambient temperatures from -25 ° C to + 35 ° С. It is designed for vibration insulation, sound absorption and waterproofing as a transport (including passenger and freight traffic, special equipment), as well as external and internal surfaces of enclosing structures of buildings and structures, foundations, roofs, pipelines, tanks, air ducts, chimneys, industrial equipment, sea and river vessels, transport hulls for various purposes, containers, tanks and tanks, including non-absorbent surfaces or surfaces with low absorption capacity that are plastic, polymer materials: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), non-ferrous metals, dense concrete and other surfaces.

Long-term weather-resistant coating is designed for operation in conditions of constant contact with water, aggressive media, including "salt fog."

The operating temperature of Bronya VibroHydroPlast ranges from -55 ° C to + 150 ° С.

Application

High-quality rubber waterproofing, vibration-proof, sound-absorbing coating Bronya VibroHydroPlast is the pinnacle of the evolution of protective coatings. It is designed for waterproofing, vibration insulation, sound absorption, protection and extension of service life of all types of materials:

• plastic,

• galvanized and black metal,

• wood,

• concrete,

• brick,

• plaster,

• plasterboard,

• slate,

• bitumen roll with sprinkling and mastic smooth substrates,

• EPDM, PVC and TPO of single-layer membranes,

• flat, pitched and domed roof structures

• and other surfaces for external and internal application

Bronya VibroHydroPlast provides super protection against moisture penetration and any weather conditions.

This paint serves as the top reflective layer. After complete drying and polymerization, Bronya VibroHydroPlast forms a seamless, rubber-like, waterproof membrane. The special formula provides high strength, elasticity, resistance to fungal and mold damage, as well as resistance to extreme atmospheric effects and ultraviolet

Key benefits

·      The drying rate is 20 minutes to touch at (20±3) ° С, complete drying is 5-7 hours at (20±3) ° С.

·      all-weather application: from -25 ° С to + 35 ° С;

·      simultaneously provides waterproofing, vibration and sound insulation;

·      compatible with any surfaces: wood, concrete, brick, plaster, gypsum board, slate and others;

·      it is possible to apply also on non-absorbent surfaces or surfaces with low absorbent capacity that are plastic, polymer materials: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), non-ferrous metals, dense concrete and other surfaces;

·      ·can be in constant contact with water and aggressive environments, including "salt fog" and on the "first coastline";

·      forms a continuous coating of the facility with the elimination of "cold bridges" and absolute water impermeability;

·      in places of constant humidity it is able to carry thermal insulation, including on highly plastic, plastic, glossy polycarbonates (with the necessary base for application, see an application guide);

·      does not increase the load on the foundation and other building structures;

·      is characterized by high durability and weather resistance to frosty drops, constant finding in direct sunlight including constant frosty drops and constant finding in direct sunlight.

·      high elasticity and crack resistance including at low temperatures

·      resistance to fungal formation, mold and algae fouling

·      does not contain organic solvents, odorless, does not ignite, environmentally safe

·      Warranty service life is 25 years.

Our advantages over analogues

Rubber coatings on an organic solvent of the Bronya VibroHydroPlast series, due to the high all-weather properties, waterproofing, vibration-insulating, sound-absorbing, chemical resistance, as well as elasticity and versatility of application have no analogues of price/quality.

The own production and development of rubber dispersions allows you to obtain the most effective protection, at a price no more expensive than any other protective coatings (on polyurethane, epoxy and even acrylic or alkyd bases), as well as high quality products.

Protective Properties of Bronya VibroHydroPlast

It has all-weather protective properties. It is resistant to chemical, mechanical influences (impacts and chips).

It has the property of "self-restoration" - with light impacts due to its hyperplasticity, the surface itself is restored.

Spheres of Bronya VibroHydroPlast application:

Bronya VibroHydroPlast is indispensable for surfaces that need both vibration-insulating and sound-absorbing properties, and make them resistant to water, as well as to chemical and mechanical influences. It is indispensable for application, where it is important not to increase the thickness of sound and vibration insulation.

Examples of application:

·      Application to noise shields and fences (material is well applied even to non-absorbent surfaces such as plastic, polycarbonate, etc.)

·      Vibration insulation and sound absorption of motor vehicles (both passenger and freight, special equipment). In this case, our material is easier to apply and as a whole has less weight than the "classic" noise and vibration isolation;

·      Vibration hydroproofing of railway transport. Bronya VibroHydroPlast is used to improve the design of wagons, which reduces the speed of their wear and improves the comfort for passengers

·      Vibration hydroproofing of equipment

·      Bronya VibroHydroPlast redistributes and effectively dampens dynamic loads of equipment allowing the use of smaller foundations and masses.

·      Plastic and metal pipes, tanks, tanks, structures in order to eliminate noise and vibration, which comes from them, as well as protection against atmospheric influences and ultraviolet radiation;

·      Production premises where sound insulation coating is required,

·      Bathrooms, showers, toilets, swimming pools, where additional sound and vibration insulation is required for thermal insulation;

·      Walls, floors inside and outside the premises (both residential and basement);

·      Balconies, loggias, windows and doorways.

Detailed characteristics:

• Base of material: synthetic rubber;

• Mass fraction of non-volatile substances,% 50

• Density kg/m3, 800±10%

• Drying time to "touch" at (20±3) 0C, min 20 - 30

• Viscosity, 20C Pa • s (Pa * s) - 16

• Initial tensile strength at 20 ° C - 36 kgf/cm2

• Tensile strength - 148 kgf/cm2

• Adhesion to concrete, mPa - 2.5

• Adhesion to metal, mPa - 2.3

• Adhesion to plastic, mPa - 1.3

• Adhesion (DIN ISO 2409) - G0

• Film resistance to static water exposure, at t = (20±2) оС, h, not less than 168

• Vapor permeability - 0.8 g/m2/h

• Elasticity,% - 350

• Water swell 20 ° C, 168h - 0%

• Frost resistance, up to - 55 ° C

• Operating temperature, Celsius, -55 ° C to + 150 ° C

• Storage temperature from -35 ° C to + 35 ° C.