"Bronya Interior" primer is an acrylic, deep-penetration interior primer in solution (a milky-white liquid, practically odorless). It is intended for treating interior absorbent bases before painting, puttying, applying plaster, wallpapering, etc. It is used for treating concrete, brick, cement-sand, and other interior surfaces.
Composition of the primer:
Treated water, acrylic dispersion, modifying and antiseptic additives.
Properties of the primer:
- strengthens the surface of the base;
- increases the adhesion of materials to the base;
- reduces the absorbency of the base;
- has a high penetrating ability;
- does not reduce the vapor permeability of the base;
- is environmentally safe.
- "Bronya Interior Primer" is developed and recommended for use with liquid thermal insulation coatings of the "BRONYA" series, improves the adhesion of the liquid ceramic thermal insulation to the surface, and reduces material consumption.
Surface preparation:
The base must be cleaned of old coatings and delaminations. The surface must be dry and clean.
Application of the primer:
The ready-to-use primer must be mixed before application. Application methods - brush, roller, sprayer. Drying time is 2 hours at a temperature of +20°C. Consumption is 100 - 200 g/m² for a single-layer application.
Note:
In addition to these instructions, when working with ready-made primers, you should be guided by SNiP 3.04.01-87, as well as general instructions for construction work. If there is any doubt about the applicability of the ready-made primers, you should test them yourself or consult with the manufacturer.
Storage and precautionary measures:
Store in a closed container at a temperature from +5 to +30°C. Shelf life - not more than 12 months.
"Bronya Interior" Primer MUST NOT BE FROZEN!
"Bronya Interior" Primer is supplied in 10-liter canisters.