The purpose of the primer Bronya Universal:

The deep penetration acrylic primer is universal in solution (a milky white liquid with almost no odor). It is intended for processing facade or interior absorbent substrates for painting, putty, plastering, wallpapering, etc. It is used for processing concrete, brick, cement-sand and other facade or interior surfaces.

The composition of the primer:

Prepared water, acrylic dispersion, modifying and antiseptic additives.

Properties of the primer:

·      strengthens the surface of the base;

·      increases the adhesion of materials to the substrate;

·      reduces the absorbency of the base;

·      it has a high penetrating ability;

·      does not reduce the vapor permeability of the base;

·      environmentally friendly.

Primer Bronya Universal is designed and recommended for use with liquid ceramic thermal insulation coatings of the BRONYA series, improves adhesion of LCT to the surface, and reduces material consumption.

Surface preparation:

The base must be cleaned of old coatings and detachments. The surface must be dry and clean.

Applying the primer:

Before applying, the finished primer must be mixed. Methods of application - by brush, roller, spray. Drying time is 2 hours at a temperature of +20C.

Consumption is 100-200 g/m2 when applied in one layer.

Note:

In addition to these instructions, when working with finished primers, you should follow SNiP 3.04.01-87, as well as general instructions for performing construction work. If you doubt the possibility of using finished primers, you should test them yourself or consult with the manufacturer.

Storage and precautions:

Store in a closed container at a temperature of +5 to +30 °C. The storage life is no more than 12 months.

Primer Bronya Universal MUST NOT BE FROZEN!

Primer Bronya Universal is supplied in containers of 10 liters.