"Bronya Anticondensate" for the Insulation of Plastic Cold Water Supply Pipes in an Office Building, Krasnoyarsk (screenshots, video)

We are presenting a report on the work carried out to insulate a section of a cold water supply pipe in an office building in Krasnoyarsk. The main goal was to solve the problem of constant condensation forming on the surface of the plastic pipes due to temperature differences.

To solve this problem, the two-component material "Bronya Anticondensate" was used. For additional reinforcement, the pipes were first wrapped with painter's mesh tape. After that, components "A" and "B" were mixed to obtain a plastic, homogeneous mass. The "Bronya Anticondensate" material was then applied by hand over the mesh tape. Finally, the wet layer was reinforced again with the tape.

As a result, the material completely handled the assigned tasks—the condensation is eliminated! The finish is aesthetic, reliable, and most importantly, dry!