Dear partners,
We would like to remind you that after we resumed production and sales of the Bronya Light modification, which included an improved production formula, the thermophysical properties of Bronya Light LCTI have improved significantly. They are now close to our base modifications, such as Bronya Classic and Bronya Facade, being only slightly less effective.
You can review the thermophysical property measurements for Bronya Light at the link below:
Bronya Light is compatible with all LCTI (including competing brands). Thanks to its innovative composition, it can, in most cases, be used as a replacement for other LCTI, as its thermophysical properties are an order of magnitude higher than those of other similar products.
Where a 3 mm layer of Bronya Classic or Bronya Facade is required, you can now apply the first and last layers with the base modifications (Classic or Facade) and "build up" the remaining thickness with Light. This creates a layered "sandwich." A table of temperature measurements on the surface of this material is shown in the video.
Measurement of Thermophysical Properties of Bronya Light + Bronya Classic
|
Measurement Point |
Surface Temperature (°C) |
|
Electric Stove Surface |
145°C |
|
1 mm Bronya Classic |
55°C |
|
1 mm Bronya Classic + 1 mm Bronya Light |
55°C |
|
1 mm Bronya Classic + 1 mm Bronya Light + 1 mm Bronya Classic |
45°C [!] |
|
3 mm Bronya Classic |
47°C [!] |
Based on these results, it can be concluded that the Bronya Light modification does not degrade the thermophysical properties of the base Bronya Classic modification when using the scheme of 1 mm LCTI + 1 mm Bronya Light. When using the scheme of 1 mm LCTI + 1 mm Bronya Light + 1 mm LCTI, it even improves them. This is achieved because the voids of the aerogel powder in Bronya Light compensate for the non-linear dependence on layer thickness. The key is to have Bronya Light placed between two layers of LCTI.
Bronya Light putty can be applied with a spatula, trowel, or plastering machines. It perfectly levels surfaces, acting as a full-fledged finishing layer!
However, by adding 10-15% distilled water, Bronya Light transforms into a liquid thermal insulation that can be applied with a brush!
Its thermophysical properties are slightly lower than those of the base modifications but are still higher than those of the cheap analogues that have flooded the market.
And with all its physical and thermophysical performance, the price of Bronya Light is significantly more competitive.