Beware of imitation

You have decided to opt for liquid thermal insulation! But how to choose the best one and not run into a fake?

Attention! Recently, cases of pseudo-insulation based on hollow microspheres have become more frequent. It is very easy to distinguish them:

* A lot of information and not a single confirmation in the form of a laboratory test;
* Minimal or often incomplete certification;
* Application of a large number of modifications, but in reality - 1-2 products;
* Low cost (often even lower than regular paint)

Thermal insulation materials — building materials that are used for thermal insulation of building structures of industrial, residential buildings, surfaces of equipment and industrial units, means of transport. The most common thermal insulation materials at the moment are mineral wool, gas and foam concrete, foam, etc. Progress does not stand still, and these thermal insulation materials have been used for a long time. Ultrathin liquid ceramic thermal insulation BRONYA is a new generation material that has replaced the current construction heat insulators manufactured using outdated technologies and not meeting modern requirements. Liquid thermal insulation BRONYA has a large number of advantages such as small dimensions, ease of installation, very low thermal conductivity, etc.

So, you decided to opt for liquid thermal insulation, but how to choose the best one and not run into a fake?
First of all, it is necessary to pay attention to the characteristics of the material that the manufacturer claims. Many of the companies often overstate and embellish the thermal conductivity or other properties of their products. Ultra-thin liquid ceramic thermal insulation BRONYA has a very low thermal conductivity - only 0.001 W/m*K and surpasses all known analogues in its thermophysical parameters. The material has excellent adhesion to the coated surfaces and is operated in conditions from -60 ° C to +250 ° C. And these are not empty words!  Certificates and conclusions on the tests carried out by various accredited laboratories confirm the information stated! All certificates, certificates and permissions can be viewed and downloaded in the corresponding section of our website.
Remember! The use of cheap binders leads to a decrease in adhesion and resistance to atmospheric effects, which can also lead to the detachment of thermal insulation. And the use of a low-quality microsphere as a filler (Russian-made or other) can lead to the loss of all the thermophysical properties of the material, and in this case the thermal insulation coating will become more than an ordinary paint. Therefore, they are not bona fide manufacturers and cannot confirm the declared characteristics.

Microspheres of liquid thermal insulation Bronya	Cheap low-quality analog	Broken microspheres in a cheap analog

Many companies do not have competence in the material, due to the fact that they are not specialists in the field of liquid thermal insulation and cannot give correct advice and recommendations on the use of their material. Volgograd Innovative Resource Center provides its clients with complete consulting information on the use of ultrafine thermal insulation BRONYA, we attach to our material the most detailed instructions for applying to the surface, and even more. If you do not have experience in applying liquid thermal insulation or you have difficulties, it does not matter, our specialists will come to you personally and conduct installation supervision.

Also, be sure to pay attention to the container in which liquid thermal insulation is sold. The weight of the container should not be large. So a 20-liter bucket of liquid thermal insulation BRONYA weighs an average of 8-11 kg, depending on the modification. This is due to the fact that the key component is vacuum microspheres, which have an extremely low weight, respectively, if the bucket weight is higher, it is worth thinking about the quality of the product. Each bucket of ultra-thin thermal insulation BRONYA must have 2 seals.
To create our products, we use only high-quality imported raw materials from the leaders of the chemical industry and modern high-tech equipment from leading world manufacturers, ensuring accuracy and quality in multi-stage complex production.

Use only high-quality products. Beware of fakes!