Tools for heat-and-thermal calculation

This calculator is intended for approximate estimation of the required thickness
of heat insulation “Bronya” for buildings and pipings.

The required thickness calculator

Wall

Wall material Brick Concrete Expanded-clay concrete Foamed concrete Wood Metal

Wall thickness 250 400 530 670

Calculate

Bronya thickness, mm

Important!
This indicator is approximate. For accurate estimation of the required thickness of thermal insulation, fill in the Thermal Engineering Calculation Form, and send it to us at info@nano34.ru

The required thickness calculator

Pipe

Surface temperature °C 60 80 100 120 150 200

The expected temperature on an isolated surface 42 ±2°C 33 ±2°C 31 ±2°C 30 ±2°C 28 ±2°C 25 ±2°C

Calculate

Bronya thickness, mm

Important!
This indicator is approximate. For accurate estimation of the required thickness of thermal insulation, fill in the Thermal Engineering Calculation Form, and send it to us at info@nano34.ru

This calculator is intended for approximate estimation of the required amount of heat insulation “Bronya” depending on the area of isolated surface,
application method and heat insulation “Bronya” layer thickness.

The amount of material calculator

Wall

Length (m):

Height (m):

To obtain this value, please,
fill in the “Required Thickness Calculator” form

Layer thickness: 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5

Bucket capacity (l): 5 10 20

Application method: Manual Mechanical

Calculate

Surface area (m²):

The laboratory consumption of the material is 1 liter per 1 square meter of a layer thickness of 1 mm. However, when calculating the amount of material, it is necessary to take into account the overspending.
Estimated overrun varies depending on the application method:
Manual - 10%
Mechanical - 30%

Material consumption (l):

Quantity of buckets:

The amount of material calculator

Pipe

Pipe length (m):

Important!
International system of units (SI) is used for calculation, therefore, pipe diameter should be indicated in meters. For example, a value of 100 mm should be indicated as 0.1

Pipe diameter (m):

To obtain this value, please,
fill in the “Required Thickness Calculator” form

Layer thickness: 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5

Bucket capacity (l): 5 10 20

Application method: Manual Mechanical

Calculate

Surface area (m²):

The laboratory consumption of the material is 1 liter per 1 square meter of a layer thickness of 1 mm. However, when calculating the amount of material, it is necessary to take into account the overspending.
Estimated overrun varies depending on the application method:
Manual - 10%
Mechanical - 30%

Material consumption (l):

Quantity of buckets: