Conclusion on thermal conductivity 0.001 Bronya on the facade of a private house in Zelenogorsk (photo)

The test object was a private house in Zelenogorsk.
At this facility, the building was insulated from the side of the facade.
The brickwork was pre-primed with Bronya primer, then 2 mm thick “Bronya” thermal insulation was applied. The wall thickness is 400 mm.
The specialist measured the temperatures of the wall surface inside and outside the room, after applying ZHKTM "Bronya" to the outside of the wall, with the help of a certified contact device, which can be found in the photo.

Based on the results of the assessment and analysis of the surface temperature, the calculated thermal conductivity of the Bronya Stena ZhKTM was 0.001 W / m * K. This confirms the declared thermal conductivity of the Bronya material.

Congratulations to our colleagues, we ask you to contact us regarding the formation of a complete set of documentation in order to contact Russian Railways for mass use.
This document can be obtained:
1. If you are our distribution, dealership, partner center, then most likely you received this document via our corporate mailing list.
2. If you are not yet our partner, but plan to become one, as well as if you are a potential client or partner of our dealers (distributors), then you can get the above document by sending a request to our e-mail info@nano34.ru