Hello, dear friends and colleagues!
We present you an example of the use of our cool rubber materials from our representative Bronya Amur. To eliminate condensate in conditions of constant high humidity on long-length pipes of a large cold water supply unit in an apartment building in the city of Blagoveshchensk, Amur region. Due to the fact that the pipes were not just in constant condensate, but in addition, water dripped abundantly (almost poured!) from cold water pipes that were also previously condensed, after consulting with the dealer, Bronya ThermoHydroPlast material was used. Initially, the pipes were primed and reliably protected from corrosion by a single layer (300 microns) of rubber Bronya Metal Elastic. Then three layers of Bronya ThermoHydroPlast were applied-the total layer of application was 2 mm. The application was carried out using a paint brush, with one, interlayer geotextile reinforcement. It is important to note that the geotextile must be pressed tightly, since the elimination of condensation presupposes the complete absence of cavities (from the physics course we know that in addition to the difference in temperature and humidity, one of the conditions for condensation is the presence of a condensing surface, therefore reinforcement is required with complete and absolute adhesion). The application was carried out with a temporary and short-term shutdown of hot and cold water supply. After the work, the occurrence of condensate on the surface of the pipes was completely prevented, the pipes were reliably protected from external wet influences and an important bonus was the thermal insulation of pipes with anti-corrosion protection. The customer was very satisfied. It can be noted that anti-corrosion, rubber Bronya coatings, and even more so combinations paired with Bronya ThermoHydroPlast are the unconditional future, the evolution of thermal insulation rubber Bronya coatings! #AllBronya!