The topic of this news: a new act drawn up by representatives of NPO Bronya LLC stating that the boiler room of the Sverdlovsk Branch of T Plus PJSC. Yekaterinburg, per. Repair 10, the temperature was measured on the surface of the pipeline at the outlet of the boiler.
The measurements were carried out after the application of ZHKTM "Bronya Classic", for which thermal calculations of the thickness of the insulating layer were carried out.
At the time of measurement:
steel pipe surface temperature 105 °C;
temperature on the surface of the "Bronya Classic" coating 38-40 °С;
the thickness of the "Bronya Classic" coating is 2 - 2.5 mm.
The calculated thermal conductivity, according to the results of the assessment and analysis of the temperature on the surface, was 0.001 W/(m2°С). After applying "Bronya Classic" with a thickness of 2-2.5 mm, it lowered the temperature to, safe, 40 °C.
This document can be obtained:
1. If you are our distribution, dealership, partner center, then most likely you received this document via our corporate mailing list.
2. If you are not yet our partner, but plan to become one, as well as if you are a potential client or partner of our dealers (distributors), then you can get the above document by sending a request to our e-mail info@nano34.ru