Friends, colleagues, partners!
Today we have a fairly large and steep facility from Russia, Permsky kray - pulp and paper mill "KAMA." Plant, which is the successor to the glorious traditions of Russian wallets. It has been working and producing paper for the benefit of the country for more than 85 years.
The aim was to cover a total of several thousand square meters of air ducts, which on the surface had a temperature of more than + 115 degrees.
To solve the problem of reducing energy consumption by reducing the cost of cooling the industrial premises, comfortable location of employees and reducing injury hazard and from possible burns and from heat stroke, and of course to reduce heat loss on the base of the coolant, as well as of course for additional reliable fire protection, the modification of Bronya Classic NF was chosen. As a predictable and ultra-efficient product that has long proven itself to solve such problems.
Application to air ducts was carried out with an airless sprayer, layers of 0.5 mm, a total of 2.5 mm of dry layer, the surface was previously prepared by degreasing and dedusting. All application technologies were followed, and therefore the product worked in action exactly according to the calculations of our engineering department - the temperature was reduced, in all areas and at any air temperature no higher than 45 degrees.facility gets into our piggy bank.
Mass application of Bronya Classic NF at air ducts of the KAMA pulp and paper mill, Krasnokamsk, Permsky kray (photo)
23 May 2023